Semiconductor Lasers & Fiber Optic Components
Semiconductor laser sources and optical components for photonics development. Explore ELSFP external laser sources for CPO, continuous-wave butterfly lasers, ITLA tunable lasers and optical modulators.
CY-ELSFP-8PMF-UHP1-CWDM4-B +23 dBm 8-Channel CWDM4 ELSFP CW Laser Module for 2xFR4 CPO
CY-ELSFP-8PMF-UHP1-1311-B +23 dBm 8-Channel 1311nm ELSFP CW Laser Module for CPO
CP-OSFP-1.6T-2DR4 1.6T OSFP 2×DR4 Silicon Photonics Transceiver
CP-OSFP-800G-2FR4 800G OSFP 2×FR4 Silicon Photonics Transceiver
CP-OSFP-800G-DR8 800G OSFP DR8 Silicon Photonics Transceiver
The Western Optronics CP-OSFP-800G-DR8 is an 800G OSFP silicon photonics transceiver for parallel single-mode links up to 500 m. It provides eight 100G PAM4 electrical and optical lanes, dual MPO-12/APC connectivity, CMIS 5.0 management and digital diagnostics, with maximum power consumption of 15 W.
CT-CWDM4-XX-17H-PM 50 mW CW DFB Butterfly Laser
A 50 mW single-frequency CW DFB laser in a 14-pin butterfly package, with polarization-maintaining fiber and an FC/APC connector. Select one nominal wavelength: 1270, 1290, 1310 or 1330 nm. Integrated TEC, thermistor, monitor photodiode and optical isolator support fiber-optic testing and measurement.
CT-CWDM4-XX-23H-PM 200 mW CW DFB Butterfly Laser
CT-DWDM8-XX.XX-23H-PM 200 mW CW DFB Butterfly Laser
The CT-DWDM8-XX.XX-23H-PM is a 200 mW CW DFB laser with a 14-pin butterfly package, polarization-maintaining fiber and an FC/APC connector. It features a 100 kHz typical linewidth and integrated TEC, thermistor, monitor photodiode and optical isolator.
Eight wavelength options are available. A mode-hop-free version is available on request.
CA-DY700X-EX 18 GHz 1310/1550 nm Directly Modulated DFB Laser
The CA-DY700X-EX is a directly modulated DFB laser for RF-over-fiber links from 10 MHz to 18 GHz. It is offered in 1310 nm and 1550 nm configurations with an integrated optical isolator. Applications include antenna remoting, telemetry, timing and reference-signal distribution, and optical delay lines.
CA-FTM7992HM 64 Gbaud DP-QPSK Lithium Niobate Modulator
CA-AM20-OO / CA-AM40-OO 20/40 GHz Analog Intensity Modulators
This analog intensity modulator family uses titanium-indiffused X-cut lithium niobate technology for broadband optical modulation. The product overview describes low drive voltage, high linearity, an integrated photodiode and a built-in polarizer. Review the specification table to select the required bandwidth and configuration.
CA1782-XXX-XX-EM 40–100 mW CW Butterfly Laser
The CA1782-XXX-XX-EM is a continuous-wave butterfly laser for DWDM and CATV applications. Available output-power options are 40, 50, 63 and 100 mW. Its 14-pin butterfly package integrates a thermoelectric cooler, thermistor, monitor photodiode and optical isolator, with a polarization-maintaining fiber output.
CA-S7500-96 C-Band 96-Channel CW Tunable Butterfly Laser
The CA-S7500-96 is a C-band tunable butterfly laser covering 96 channels at 50 GHz spacing, with adjustable 9–13 dBm output. An integrated InP tunable laser and semiconductor optical amplifier enable electronic wavelength selection and dark tuning. The package includes an optical isolator, wavelength locker and polarization-maintaining fiber pigtail.
C120 / L120 Nano ITLA C-Band and L-Band Tunable Laser Assemblies
Compact continuous-wave tunable laser assemblies for 100–800 Gbps coherent optical modules. Choose C120 for C-band coverage with up to 17 dBm output, or L120 for L-band coverage with up to 16.5 dBm output. Both offer a maximum 100 kHz Lorentzian linewidth, 0.1 GHz minimum grid spacing, shuttered tuning and RS232 control.
TL-NC040TA105 C-Band 89-Channel ITLA Tunable Laser Assembly
The TL-NC040TA105 is a C-band integrable tunable laser assembly with 89 channels on a 50 GHz grid and adjustable 9–13 dBm output. It integrates a tunable InP laser and semiconductor optical amplifier, a wavelength locker and a polarization-maintaining fiber pigtail. Features include dark tuning and FM dither for stimulated Brillouin scattering suppression.
