Fiber-optic test equipment for component characterization, module development and production testing. Compare optical power meters, tunable and broadband laser sources, and multichannel NRZ/PAM4 bit error rate testers.

عرض 1–24 من أصل 33 نتيجة

Show sidebar
Show 9 12 18 24
8-channel ELSFP external continuous-wave laser source module
CY-ELSFP-8PMF-UHP1-CWDM4-B CWDM4 ELSFP laser specification diagram

CY-ELSFP-8PMF-UHP1-CWDM4-B +23 dBm 8-Channel CWDM4 ELSFP CW Laser Module for 2xFR4 CPO

, ,
The CY-ELSFP-8PMF-UHP1-CWDM4-B is an eight-channel continuous-wave external laser source for 2xFR4 co-packaged optics. It provides two sets of 1271, 1291, 1311 and 1331 nm wavelengths, with at least +23 dBm output per channel. The ELSFP module includes CMIS management, a polarization-maintaining blind-mate optical interface and a nominal 3.3 V supply. For external modulation by a compatible optical engine; not a complete optical transceiver. Compare CWDM4 and 1311 nm ELSFP configurations.

Download Datasheet (PDF)

Evaluation Kit Datasheet (PDF)

Optical Test Cable Datasheet (PDF)

8-channel ELSFP external continuous-wave laser source module
CY-ELSFP-8PMF-UHP1-1311-B 1311 nm ELSFP laser specification diagram

CY-ELSFP-8PMF-UHP1-1311-B +23 dBm 8-Channel 1311nm ELSFP CW Laser Module for CPO

, ,
The CY-ELSFP-8PMF-UHP1-1311-B is an eight-channel ELSFP continuous-wave laser source for co-packaged optics. Two banks of four lasers operate at a typical wavelength of 1311 nm, with at least +23 dBm output per channel. The module provides CMIS management and a polarization-maintaining blind-mate optical interface, with a nominal 3.3 V supply. For external modulation by a compatible optical engine; not a complete optical transceiver. Compare CWDM4 and 1311 nm ELSFP configurations.

Download Datasheet (PDF)

Evaluation Kit Datasheet (PDF)

Optical Test Cable Datasheet (PDF)

Western Optronics CT-CWDM4 CW DFB laser in a 14-pin butterfly package with PM fiber and transparent background

CT-CWDM4-XX-17H-PM 50 mW CW DFB Butterfly Laser

, ,

A 50 mW single-frequency CW DFB laser in a 14-pin butterfly package, with polarization-maintaining fiber and an FC/APC connector. Select one nominal wavelength: 1270, 1290, 1310 or 1330 nm. Integrated TEC, thermistor, monitor photodiode and optical isolator support fiber-optic testing and measurement.

Download Datasheet (PDF)

Western Optronics CT-CWDM4 CW DFB laser in a 14-pin butterfly package with PM fiber and transparent background

CT-CWDM4-XX-23H-PM 200 mW CW DFB Butterfly Laser

, ,

200 mW CW DFB laser in a 14-pin butterfly package with polarization-maintaining fiber and an FC/APC connector. Select one nominal wavelength: 1270, 1290, 1310 or 1330 nm. Integrated TEC, thermistor, monitor photodiode and optical isolator.

Download Datasheet (PDF)

Western Optronics CT-DWDM8 200 mW CW DFB laser in a 14-pin butterfly package with transparent background

CT-DWDM8-XX.XX-23H-PM 200 mW CW DFB Butterfly Laser

, ,

The CT-DWDM8-XX.XX-23H-PM is a 200 mW CW DFB laser with a 14-pin butterfly package, polarization-maintaining fiber and an FC/APC connector. It features a 100 kHz typical linewidth and integrated TEC, thermistor, monitor photodiode and optical isolator.

Eight wavelength options are available. A mode-hop-free version is available on request.

Download Datasheet (PDF)

CA-DY700X-EX directly modulated DFB laser for 18 GHz RF-over-fiber links

CA-DY700X-EX 18 GHz 1310/1550 nm Directly Modulated DFB Laser

, ,

The CA-DY700X-EX is a directly modulated DFB laser for RF-over-fiber links from 10 MHz to 18 GHz. It is offered in 1310 nm and 1550 nm configurations with an integrated optical isolator. Applications include antenna remoting, telemetry, timing and reference-signal distribution, and optical delay lines.

Download Datasheet (PDF)

CA1782 continuous-wave laser in a 14-pin butterfly package

CA1782-XXX-XX-EM 40–100 mW CW Butterfly Laser

, ,

The CA1782-XXX-XX-EM is a continuous-wave butterfly laser for DWDM and CATV applications. Available output-power options are 40, 50, 63 and 100 mW. Its 14-pin butterfly package integrates a thermoelectric cooler, thermistor, monitor photodiode and optical isolator, with a polarization-maintaining fiber output.

Download Datasheet (PDF)

CA-S7500-96 C-band 96-channel tunable butterfly laser

CA-S7500-96 C-Band 96-Channel CW Tunable Butterfly Laser

, ,

The CA-S7500-96 is a C-band tunable butterfly laser covering 96 channels at 50 GHz spacing, with adjustable 9–13 dBm output. An integrated InP tunable laser and semiconductor optical amplifier enable electronic wavelength selection and dark tuning. The package includes an optical isolator, wavelength locker and polarization-maintaining fiber pigtail.

Download Datasheet (PDF)

Western Optronics C120 and L120 Nano ITLA tunable laser assembly

C120 / L120 Nano ITLA C-Band and L-Band Tunable Laser Assemblies

, ,

Compact continuous-wave tunable laser assemblies for 100–800 Gbps coherent optical modules. Choose C120 for C-band coverage with up to 17 dBm output, or L120 for L-band coverage with up to 16.5 dBm output. Both offer a maximum 100 kHz Lorentzian linewidth, 0.1 GHz minimum grid spacing, shuttered tuning and RS232 control.

C120 Datasheet (PDF)L120 Datasheet (PDF)

TL-NC040TA105 C-band 89-channel integrable tunable laser assembly

TL-NC040TA105 C-Band 89-Channel ITLA Tunable Laser Assembly

, ,

The TL-NC040TA105 is a C-band integrable tunable laser assembly with 89 channels on a 50 GHz grid and adjustable 9–13 dBm output. It integrates a tunable InP laser and semiconductor optical amplifier, a wavelength locker and a polarization-maintaining fiber pigtail. Features include dark tuning and FM dither for stimulated Brillouin scattering suppression.

Download Datasheet (PDF)

CA9052-16-CO 16-channel CWDM light source, front view
CA9052-16-CO 16-channel CWDM light source, angled view of the rack-mount enclosure and front panel

CA9052-16-CO 16-Channel CWDM Light Source

,

The CA9052-16-CO is a 16-channel CWDM light source with front-panel optical outputs and individual channel switches. The rack enclosure includes mounting ears for integration into optical test setups.

The front panel provides optical outputs marked PMF and switches numbered 01–16. Please specify the required channel wavelengths and optical power when requesting a configuration.

Download Datasheet (PDF)

CA9052 four-channel CWDM LAN-WDM DFB laser source

CA9052 4-Channel Desktop CWDM/LAN-WDM DFB Laser Source

,
The CA9052  Four Chanel  Desktop CWDM/LanWDM  DFB laser source offer superior performance for the test of CWDM, DWDM components, AWG & PLC components, optical amplifiers, and other general purpose of fiber optical test and measurement applications. It is special design for volume couplers, transceiver/receiver  and PLC production line application. CA9052 Four Chanels Desktop CWDM/LanWDM DFB laser source  is a High Performance, Small Dimension, Fast Startup, Affordable Optical Laser Source. It provides four chanels  high performance,  fix wavelength laser output.   UC Instruments can provide any four chanels of  850, 980, 1250,1270,1290, 1310,1330, 1350, 1370, 1390, 1410, 1450, 1470, 1490, 1510,1530,1550, 1570, 1590, 1610,1625 nm wavelength laser output per customers request.
Western Optronics CX9812-O O-band tunable laser source, 1250–1350 nm

CX9812-O O-Band Tunable Laser Source, 1250–1350 nm

,
The CX9812-O tunable light sources are new-generation high performance continuous wave (CW) tunable laser sources for the use in various single band or combined band windows, ranging from 1250 nm to 1350 nm. It can be used either as a wavelength switching laser or as a high-speed sweeping laser. The innovative design employs the state- of-the-art high-speed tunable technology and gain continuation in wide wavelength range. With no moving parts, the voltage-controlled wavelength tuning enables rapid wavelength switching over the whole operating wavelength window. This specification describes and defines WESTERN OPTRONICS’ CW tunable light sources with applications to test and measurement. They provide fast wavelength tuning, high power output, and high power stability. A full-band tunable laser is also available, covering 1250~1350 nm wavelength range, with seamless wavelength tuning. System control and communication is provided though the RS232 interface, which allows users to dynamically set operating wavelength with ease.
CA92001C C-band 96-channel ITLA tunable laser module

CA92001C C-Band 96-Channel 50 GHz ITLA Tunable Laser Module

,
The CA92001C is a tunable laser module compatible with the OIF “Integrabl Tunable Laser Assembly” MSA, based on novel monolithic InP chip that integrates a tunable laser with a semiconductor optical amplifier (SOA). The tunable laser is an electronically tuned device that can address any wavelength in the C-band. Since no mechanical or thermal adjustments are necessary, channel switching is fast with straight forward control circuitry. The SOA facilitates flexible control of the output power and acts as a shutter when reverse biased, enabling dark tuning between channels. The integrated chip has been optimized to improve the power efficiency. The chip is Based on advanced InP technology platform, with proven reliability. The devices are Packaged into a compact, low- profile hermetically sealed package, with an internal Optical isolator and a wavelength locker. The locker monitors both output power And frequency of the light emitted from the front facet of the chip, enabling a Closed loop control that guarantees stability of the frequency and output power Over life, to within the requirements of 50GHz ITU grid spacing applications. The assembly contains all electronics necessary to control the laser, offering users a simple and well-defined digital command interface.
Western Optronics UC8112CQ tunable laser source with black inactive display

UC8112CQ Desktop C-Band Swept Tunable Laser Source

,
The UC8112 Desktop Tunable Lasers offer superior performance for the testing of DWDM components, AWG & PLC components, optical amplifiers EDFA, DWDM system and other general purpose fiber optic test and measurement applications. It has a wavelength high accuracy, high power output, small dimensions, fast startup, and is an affordable tunable laser source system. The system comes with O band，C band, L band, or C + L band options.
Western Optronics CA92050-CG-PM 1 kHz swept C-band tunable laser source

CA92050-CG-PM 1 kHz Fast Swept Tunable Laser Source

,
The CA92050-CG-PM  1 kHz fast swept  tunable laser modules offer superior performance for the test of Fiber Vibration Sensing, DWDM components, AWG , WSS, OPM components, Fiber sensing( especially for vibration fiber  sensing application) ,  optical amplifiers, and other general purpose of fiber optical test and measurement with high wavelength resolution applications. Each of CA92050-CG-PM  tunable laser modules is connected to a PC with RS232 cable. It becomes a High Accuracy, High Power, Small Dimension, Fast Startup, Affordable Tunable Laser Source system. It provides C band tunable laser sources options.  CA OPTRONICS GROUP also provide modules control software. The module also can be integrated into customers’ products system with RS232 interface control. The CA92050-CG-PM swept lasers are widely deployed in FBG sensing systems and passive component test systems.
CA9033 C-plus-L-band ASE broadband light source

CA9033 C+L-Band ASE Broadband Light Source, 1525–1610 nm

,
The CA9033 C+L  band broadband light source  is based on  ASE  technology. C+L band ASE provides significantly more power density into a single-mode fiber than a regular LED and more than 90 nm wide broadband light source. It  offer superior performance for the test of  DWDM/CWDM components, AWG & PLC components, optical amplifiers, tele-com optical filter and other general purpose of fiber optical test and measurement applications. It is special design for volume  DWDM/CWDM filter and components  production line application. CA9033 C+L band ASE broadband light source is a High Performance, Small Dimension, Fast Startup, Affordable Optical Broadband Light Source. It provides 1525 ~ 1610 nm wavelength C+L band broadband light output.
CA9034 O-band 1260 to 1360 nm broadband SLED light source

CA9034 O-Band Broadband SLED Light Source, 1260–1360 nm

,
The CA9034  O  band broadband light source  is based on  SLED  technology. O band SLED provides significantly more power density into a single-mode fiber than a regular LED and more than 90 nm wide broadband light source. It  offer superior performance for the test of  DWDM/CWDM components, AWG & PLC components, optical amplifiers, tele-com optical filter and other general purpose of fiber optical test and measurement applications. It is special design for volume  DWDM/CWDM filter and components  production line application. CA9034 O band SLED broadband light source is a High Performance, Small Dimension, Fast Startup, Affordable Optical Broadband Light Source. It provides 1260 ~ 1360 nm wavelength O band broadband light output.
CA9036 1650 nm broadband SLED light source

CA9036 1650 ±15 nm Broadband SLED Light Source

,
CA9036 1650 +/- 15 nm  broadband SLED light source is a high performance, small dimension, fast startup, affordable optical broadband light source. It provides 1635 ~ 1665 nm wavelength range broadband light output. CA9036 offer superior performance for the test of  DWDM/CWDM components, AWG & PLC components, optical amplifiers, tele-com optical filter and other general purpose of fiber optical test and measurement applications. It is special design for volume  DWDM/CWDM filter and components  production line application.
CA-ITLS1550 C-band 96-channel tunable laser light source

CA-ITLS1550 C-Band 96-Channel 50 GHz Tunable Laser Source

,
The CA-ITLA1550 is based on a tunable laser and driver chip with unique software / hardware algorithm and control interfaces to achieve high-quality full C-band turnability laser light source. The laser wavelength covers the 50GHz ITU Grid in the C-band. This test instrument is a perfect fit for testing DWDM transmission system, DWDM optical passive components and modules manufacturing in the production line.
Western Optronics WEOG OPM-16 multi-channel optical power meter with 16 FC inputs

OPM Series 4/8/12/16-Channel Optical Power Meter

,

A compact multichannel optical power meter for parallel AC/DC average optical power measurement.

  • 4, 8, 12 or 16 channels
  • 640 × 480 color LCD displays all channels simultaneously
  • 850, 1310, 1490 and 1550 nm calibration; custom wavelengths available
  • RS232 standard; optional GPIB or Ethernet interfaces

Download Datasheet (PDF)

Western Optronics WEOG 16T2 three-slot 1.6T network tester

16T2 Multi-Port 1.6T Network Tester | 212G SerDes

,

A modular 1.6T/800G network test platform for optical modules, AOCs and AECs.

  • 3 independent slots; up to 3 × 1.6T or 12 × 800G ports
  • 212G SerDes; 1.6T / 800G / 400G / 200G / 100G
  • RFC 2544, Layer 2 traffic and pre-/post-FEC BER
  • Automated CMIS 3.0–5.3 testing with 1,700+ cases

Download Datasheet (PDF)

Western Optronics BERT1B882 1.6T high-speed bit error ratio tester

BERT1B882 1.6T High-Speed Bit Error Ratio Tester

,

Modular 8-channel bit error ratio tester for 1.6T and 800G optical transceiver and high-speed cable testing.

  • 53.125 / 106.25 GBaud PAM4; PAM4 and NRZ signaling
  • Interchangeable optical and electrical port modules
  • Transmitter pre-emphasis and adaptive receiver equalization
  • KP4 FEC, SNR and eye diagram analysis

Download Datasheet (PDF)

Western Optronics 6362 Series optical spectrum analyzer with English panel labels and transparent background

6362 Series Optical Spectrum Analyzer

,

The Western Optronics 6362 Series optical spectrum analyzers offer five model-specific wavelength ranges covering 350–2500 nm across the series. Designed for laser, optical transceiver and WDM testing, with resolution down to 0.01 nm on the 6362DA, a 12.1-inch touch screen, 128 GB storage, USB and Ethernet.

Download Datasheet (PDF)