Arabic 
English 
Chinese 
German 
French 
Russian 
Panjabi سرعة عالية بيرت
Compare multichannel bit error rate testers with pulse pattern generators and error detectors for high-speed electrical links. Explore UC9210S, UC9264C and UC9264Q systems with model-specific NRZ and PAM4 capabilities.
16T2 Multi-Port 1.6T Network Tester | 212G SerDes
BERT1B882 1.6T High-Speed Bit Error Ratio Tester
Modular 8-channel bit error ratio tester for 1.6T and 800G optical transceiver and high-speed cable testing.
- 53.125 / 106.25 GBaud PAM4; PAM4 and NRZ signaling
- Interchangeable optical and electrical port modules
- Transmitter pre-emphasis and adaptive receiver equalization
- KP4 FEC, SNR and eye diagram analysis
UC9210S 4-Channel 0.622–15 Gb/s NRZ Pulse Pattern Generator and Error Detector
The UC9210S is a high performance, flexible 4 channel Pulse Pattern Generator and Error Detector that can operate from 0.622 ~ 15.0 Gbps. It also can be combined with two sets UC9210S 8 CH 0.622 to 15.0 Gbps Pulse Pattern Generator and Error Detector that incorporates an external one by 8 rate clock synthesizer to approach a 100 Gbps PPG and ED system . Its small size allows it to be placed close to the device under test, it can also be placed further away using the TX driver pre and post emphasis controls features to compensate for cable and interconnect losses. It also has a non destructive, integrated eye outline capture feature along with a quick eye height and width measurement capability.
The UC9210S was designed to characterize high speed digital links during the engineering, manufacturing or installation phases of a project. It was special design for 4 CH 0.622 ~ 15 .0 Gbps transmitters and receivers devices testing. Such applications could include the testing of IC’s, optical components, transceivers, copper cables, back planes and interconnects. The UC9210S can be used for compliance testing of Ethernet, Fiber Channel, Infiniband, PCIE, SONET, Data Center and proprietary link standards.
UC9264C 4-Channel NRZ Pulse Pattern Generator and Error Detector, Up to 29 Gb/s
The UC9264C 4 Channel 1.25 ~ 29.0 Gb/s pulse pattern generator and error detector is a high performance, flexible and cost effective four channel Pulse Pattern Generator and Error Detector that can operate from 1.25Gbps, 1.8~14.5Gbps and 25-29Gbps each Channel. 4 channel 29.0 Gb/s make it total up to over more than 116 Gb/s testing capacity. It is also a standalone Bit Error Rate test solution that incorporates an internal full rate clock synthesizer. Customers can also contact with us to discuss 8 CH 1.25 - 29 Gbps RNZ PPG & ED system (up to 200 Gbps Testing) demand.
Its small size allows it to be placed close to the Device Under Test (DUT), it can also be placed further away using the TX driver pre and post emphasis controls features to compensate for cable and interconnect losses. It also has a non destructive, integrated eye outline capture feature along with a quick eye height and width measurement capability.
The UC9264C was designed to characterize high speed digital links during the engineering, manufacturing or installation phases of a project. Such applications could include the testing of IC’s, optical components, transceivers, copper cables, back planes and interconnects. The UC9264C can be used for compliance testing of TOSA, ROSA, Ethernet, Fiber Channel, Data-com, Infiniband, PCIE, SONET and proprietary link standards.
UC9264Q 4/8-Channel 28 Gbps NRZ / 56 Gbps PAM4 Bit Error Ratio Tester
The UC9264Q is the industry’s costeffective, easy-to-use multichannel 56Gbps electrical biterror-ratio tester (BERT) for testing of components, cables, optical module and systems in R&D and manufacturing environments. It supports multi data rate and NRZ/PAM4/PAM4+FEC mode for different testing application.